techdrives drives and components
About us Panasonic products Linear motion Shaft couplings Shaft Connections Signalling & Displays Clutches & Brakes Gears/geared motors Torque limiters Applications News2017
About us Products Applications News Downloads & Links Contact

CONTACT US

sales@techdrives.co.uk

01234 753201

Torque limiters Axial force limiters
Locking bushes Clutches & Brakes Panasonic products Torque limiters Linear motion Gears/geared motors Screw Jacks Signalling & Displays

AXIAL FORCE LIMITER FOR LINEAR LOADS

COMINTEC TYPE DSA FOR FORCES 25 TO 4700N

Type DSA axial force limiters trip at an adjustable pre-set force in tension or compression.  On overload they move through a stroke with low resistance force and the movement can be detected with a proximity switch.

These axial force limiters are backlash free and easy to adjust with the innovative ComInTec Calibration system.  They trip at the same force in either tension or compression.  Manual reset takes them back to the original length position.

Three models and different spring settings suit release forces 25 to 4700N and each setting is mechanically adjustable over a range from 4:1 up to 10:1 on some sizes.  Typical applications are for gearbox torque arm mounting and for crank arms.  The DSA limiter itself comprises central cylindrical module that contains the spring loaded arms.  External rods and eye connections can be supplied customised for individual applications.

Model

Available force ranges N

Central diameter

Module length

DSA 1

25-90    55-500     295-1300

37

66

DSA 2

320-1050         880-2850

42

85

DSA 3

530-2430      970-4700

56

105

LINKS:

DOWNLOADS

axial force limiter for linear loads

Details for DSA5 available on request.