Small DC & AC linear actuators

Small industrial actuators type ATL to 11000N

These industrial duty linear actuators suit low to medium loads with strokes up to 800mm.  Rated linear speeds range from 2 up to 150 mm/s.  Motors are either DC 24V (12 and 36V also available) or AC, either 1 or 3 phase. Normally stroke lengths are supplied in standard increments of 100mm starting at 100mm.

The ATL models with acme threads are robust and are designed for duties up to 30% over a 10 minute period.  Stroke limit switches can be specified and these are fitted external to the outer tube.  These models are generally not capable of being backdriven.

The BSA models with ball screws have higher efficiencies and can be run up to 100% duty.  Dimensionally they are similar to the ATL models.  Backdriving by the load is possible and brake motors are usually fitted