These linear actuators are electromechanical devices designed for push and pull forces in wide-
Standard actuator strokes are from 100 to 1500mm. In push applications the stroke may be limited by buckling limits. Special designs with non-
These actuators are manufactured by Servomech and Linear-
Correct sizing of linear actuators involves speeds, forces and considerations of mounting, control, duties and operating environment. We recommend that use is made of our enquiry sheets which can be downloaded from the product pages.
Forces to 350kN, speeds 1 to 140 mm/s, motors ac,dc or servo, duty 30%. General purpose actuators for medium to high forces.
Wide range with strokes up to 1500m.
Forces to 6000N, speeds 5 to 50 mm/s, motors 12V DC or 24V DC, duty 15%. Integral limit switches. These actuators suit small machinery, food preparation, agricultural machines and switchgear.
Forces to 11000N, speeds 6 to 150 mm/s, motors 230V AC or 12/24V DC, duty rating 15% for ATL, 100% for BSA. Suits guides & positioning on industrial machinery.
Techdrives brings to the UK the widest range of industrial electric linear actuators supported by the expert advice of our engineers. Linear actuators lift, tilt, push, pull & adjust. Manufactured by Italian specialist and sister companies Linear-
Forces to 123kN Speeds 2 to 93 mm/s motors ac, dc or servo duty 100%. BSA actuators give medium to high forces with high efficiency.
Forces to 12000N, speeds 40 to 875 mm/s, motors, ac, dc or servo, duty 100%. Rapid linear motion for doors, diverters and mechanical handling. Often supplied with servo motors as part of an automation system.
High power actuators with forces up to 200kN and strokes to 1.5m suiting solar tracking and other heavy duties. They offer an alternative to screw jacks.
Medium sized linear actuators with adjustable stroke limit switches under a IP65 cover, suiting loads from 10 to 2500kg. Allows simple linear positioning.
High speed actuators to 1500 mm/s giving advantages of precise control and energy efficiency compared to pneumatic or hyrdraulic cyclinders, 5000 to 40000N.